Help/Systems SEQUEL Software PowerTech Skybot Software
Help/Systems
The World's Leader in IBM iSeries Software Solutions
Home › Converting From Robot/AUTOTUNE 7.0 to 8.0

Converting From Robot/AUTOTUNE 7.0 to 8.0

Product: 
Robot/AUTOTUNE

Before You Begin

Read these instructions completely before you begin.

  • Moving from Robot/AUTOTUNE 7 to version 8 requires you to delete version 7 and install version 8 as a new installation.
  • You must have IBM i V6R1 or higher to run Version 8 of Robot/AUTOTUNE.

Before Deleting and Reinstalling Robot/AUTOTUNE

Before you delete and reinstall Robot/AUTOTUNE, do the following:

  1. Make sure ATLIB is in your library list. Enter the following command to print the AT122 report:

    2. CALL AT122

    This report details your existing performance factors and control values for Robot/AUTOTUNE. You can use this report as a guide when re-entering the values after reinstalling the product.

  2. Enter the following command:

    3. ATLIB/CNLAT

  3. Robot/AUTOTUNE version 8 requires a new permanent security code. If you did not receive this new permanent security code, call your Regional Sales Manager.
  4. To delete the Robot/AUTOTUNE library from your system, enter the following command:

    5. DLTLIB ATLIB

Reinstalling Robot/AUTOTUNE

Use the following instructions to reinstall Robot/AUTOTUNE on your system:

  1. Sign on under a user profile that is a member of the user class *SECOFR, and has at least the following special authorities: *ALLOBJ, *SECADM, *JOBCTL, and *IOSYSCFG. The user profile should have Limit capabilities set to *NO.
  2. Enter the following command:

    3. RBTCDRLIB/HLPCDMENU

    This displays the Maintain Help/Systems Products menu.

  3. Select Option 1 (Install Help/Systems Product) from the Maintain Help/Systems Products Menu and press Enter.
  4. Enter a 2 in the Opt column next to Robot/AUTOTUNE on the Install Products panel and press Enter to begin the installation.

When the installation is complete, you will receive a message that Robot/AUTOTUNE was installed successfully. If the message indicates that the install was not successful, call Help/Systems Technical Support at 952-933-0609 for additional help.

After you have successfully installed Robot/AUTOTUNE, enter one of the following commands to display the Auto Tune Menu:

ATLIB/ATM

or

GO ATLIB/ATM

or

If RBTSYSLIB exists on your system, enter RBO and select option 3.

Follow the instructions in the Robot/AUTOTUNE User Guide to set up Robot/AUTOTUNE on your system. Use the AT122 report as a guide to re-enter your performance factors and control values. Use the CALL AT900 command and enter your new permanent security code.

Note: Robot/AUTOTUNE 8.0 performance factor values default to megabytes (MB). You can specify values using either MB, KB, or a percentage value, but there are limitations. Percentage values are more appropriate for logically partitioned iSeries systems where main storage can change continuously. See the Robot/AUTOTUNE User Guide for complete information on entering performance factors.

You can access an online version of the Robot/AUTOTUNE User Guide and other documentation from the Help/Systems download page and Help/FACTS page.

Updated Jan. 9, 2012