Help/Systems SEQUEL Software PowerTech
Home › Support › Current Versions

Current Versions

General Information

  • To download software, you must create an account with the site or log in.
  • To try software you don't yet own, request a software trial.
  • If you are using the currently shipping release, you can update your modification level through your "my account" page or the update page.
  • If you are using the previous release, get the conversion file from the conversion page.
  • If you have additional questions or problems, please contact Help/Systems Technical Support at 952-933-0609 (U.S. and Canadian customers). Others should contact their international representative.

How can I tell what I am currently running?

To find the release and modification level or creation date of each product you currently have installed, enter the following command on a command line:

RSLVER

Robot/AUTOTUNE, Robot/MONITOR, and EASY VIEW users: If you have no other Robot products installed, use the following commands to determine the release/modification level of your products:

Robot/AUTOTUNE:

ATLIB/ATM — displays in upper left corner

Robot/MONITOR:

DSPDTAARA RBTMTRLIB/MTRRELMOD

EASY VIEW:

DSPDATAARA EZVIEW/EVXRELMOD

Recommended Product/Operating System Compatibility

The following table shows the currently shipping version of each product and the minimum level to run on each supported version of the OS.

Product Currently 
Shipping 
Version		 IBM i
V7R1		 IBM i
V6R1		 IBM
i5/OS
V5R4 
 
Robot/ALERT 5.52 5.51 5.44 5.32
Robot/AUTOTUNE 8.09 (V7R1, V6R1)
7.30 (V5R4)		 8.07
(note 6)		 8.00
(note 6)		 7.16
(note 6)
Robot/CONSOLE 5.09 5.08 4.39 4.21
Robot/CORRAL 2.16 2.16 2.14 2.09
Robot/CPA 4.34 4.33 4.29 4.22
Robot/LPAR

2.16
(note 5)

 2.16
(note 5)		 2.08
(note 5)		 2.00
(note 5)
Robot/MONITOR 8.03 (V7R1, V6R1)
7.14 (V5R4)		 8.03  8.00 7.06
Robot/NETWORK Host 10.24 10.23 10.10 9.63
(notes 2, 7, 9)
Robot/NETWORK Node 10.23 10.22 10.09 9.53
(notes 7, 9)
Robot/REPLAY 3.11 3.10 3.02 2.19
Robot/REPORTS 7.51
(note 4)		 7.50
(note 4)		 7.39
(note 4)		 7.23
(note 4)
Robot/SAVE 11.31
(note 1) 		 11.30
(note 1)		 11.17
(notes 1, 8)		 10.20
(note 1) 
Robot/SCHEDULE 10.30 10.29 10.15 9.41
Robot/SCHEDULE Enterprise 1.08 1.07 1.00 1.00
Robot/SCHEDULE
EnterpriseOne Interface		 1.22 1.21 1.21 1.09
Robot/SPACE 3.13 3.12 3.01 2.06
Robot/TRANSFORM 1.31
(note 3)		 1.30
(note 3)		 1.24 1.17
Robot/TRAPPER 1.22 1.21 1.19 1.12
Robot/UPS 3.20 3.19 3.16 3.07
Robot Browser Interface 2.08 2.08 2.03 1.06
RBTSYSLIB 1.97 1.97 1.97 1.93 
(note 7)
EASY VIEW 8.14 8.13 8.04 7.29
 

 

Notes:
1. You must have IBM Media and Storage Extensions (MSE) to run Robot/SAVE.
2. This is the minimum release/modification level required to use the graphical user interface with i5/OS V5R4 or higher. See the Help/FACTS: Changes for Help/Systems GUI products on i5/OS V5R4 or Higher. If you do not use the graphical user interface for these products, you do not need to update to the release/modification level specified for i5/OS V5R4.
3. You must have JDK 1.3 (or higher) installed to install Robot/TRANSFORM on the System i. JDK 1.4 must be installed to run the IFS monitor job.
4. If you use Robot/SAVE to archive reports, you must have Robot/SAVE R11M06 (or higher) installed on your system.
5.
 Robot/LPAR Version 2 (or higher) requires HMC Version 6, Release 1.3 (or higher).
6. Updating Robot/AUTOTUNE:

V5R3 and V5R4: Robot/AUTOTUNE must be updated when upgrading from i5/OS V5R3 to V5R4. Several Robot/AUTOTUNE programs must be replaced to update the product for V5R4. Do one of the following to update the product if your operating system is V5R3:
  a. If Robot/AUTOTUNE is at R07M16 or later, change the data area ATRELMOD in ATLIB before updating the product to V5R4. Enter the following command:

CHGDTAARA DTAARA(ATLIB/ATRELMOD(1 14)) VALUE(‘R07M15 060101’)

You then can update Robot/AUTOTUNE to R07M16 or later for V5R4.
  b. If Robot/AUTOTUNE is at R07M15, you can simply update the product to the most current version for V5R4.
  V6R1: When upgrading your system to V6R1, you must delete Robot/AUTOTUNE version 7 and perform a new installation of version 8 on the V6R1 system. You cannot install Robot/AUTOTUNE 8 until the upgrade to V6R1 is complete. The new installation of verison 8 requires you to reenter your setup values plus a new security code. 

Note: Robot/AUTOTUNE 8 does not run on a V5R3 or V5R4 system. Contact Help/Systems for a Help/FACTS describing the update process.
7. If you are running Robot/NETWORK Host or Node on a V5R4 system, RBTSYSLIB must be at R01M93 on all systems in the network.
8. In V6R1, IBM changed the default behavior of the Power Down System (PWRDWNSYS) command. The default value (*ENVVAR) for the CONFIRM parameter on the PWRDWNSYS command now displays a confirmation window. This will cause the Robot/SAVE Restricted State Utility (RSU) to halt and wait for a confirmation before performing the IPL. Enter the following command on a command line to permanently bypass the confirmation window on the PWRDWNSYS command:

ADDENVVAR ENVVAR(QIBM_PWRDWNSYS_CONFIRM) VALUE(*NO) LEVEL(*SYS)
9. Robot/NETWORK 9 on an MMA system running V5R4 must be at the level shown. Robot/NETWORK 10 on an MMA system running V5R4 must be at R10M10 (Host) and R10M09 (Node).

 Last updated: 14-July-2010